IMPROVED METHOD OF RIB LEVELLING IN AP IMPELLER FABRICATION
| Author(s) | : | B.Dhanasakkaravarthi, K.Balasubramanian, G.Senthil Kumar |
| Institution | : | Associate Professor Department of Mechanical Engineering, Panimalar Institute Of Technology, Poonamllee, Tamilnadu, Chennai-123 |
| Published In | : | Vol. 5, Issue 4 — April 2018 |
| Page No. | : | 1188-1192 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
Manual process of rib leveling is replaced by machining process to reduce the time and effort of the humanwork. The machining is done in a vertical boring machine. During machining process the stability of the welded ribreduces. Hence Ethylene Propylene Rubber is placed in between the ribs to increase the stability of the welded rib. Byusing this method, the rib surface was levelled and obtained a good surface finish. The same operation can be done in ahorizontal boring machine with the help of fixture; the fixture helps to hold the job vertically during machining
B.Dhanasakkaravarthi, K.Balasubramanian, G.Senthil Kumar, “IMPROVED METHOD OF RIB LEVELLING IN AP IMPELLER FABRICATION”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 5, Issue 4, pp. 1188-1192, April 2018.
