Study of Parameters Affecting Tool Life
| Author(s) | : | Gaurav M. Gohane, Atulya R. Sharma, G. Rohit Pillai, Kunal D. Itankar, Himanshu Kumar |
| Institution | : | Asst. Professor, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur |
| Published In | : | Vol. 5, Issue 3 — March 2018 |
| Page No. | : | 252-256 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
In order to shape the metal into required form and to get the good dimensional tolerances machining is animportant aspect in the field of manufacturing. Chip, cutting tool and Work piece are thee three basic elements in whichthe cutting tool is one of the major considerable factors. In Manufacturing Industry during machining operations the toolwear is a major problem encountered. Tool life prediction has a great influence on productivity industrial activities.Manufacturing cost and operation time is intended to reduce by the High material removal rate, while the productivity interms of machining cost and operation time for an expected work piece strongly depends on tool wear. Feed rate has themost significant effect on tool life followed by spindle speed and depth of cut.
Gaurav M. Gohane, Atulya R. Sharma, G. Rohit Pillai, Kunal D. Itankar, Himanshu Kumar, “Study of Parameters Affecting Tool Life”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 5, Issue 3, pp. 252-256, March 2018.
