“STUDY ON PARTIAL REPLACEMENT OF CEMENT WITH IRON ORE MINE TAILING AND GROUND GRANULATED BLAST FURNACE SLAG”
| Author(s) | : | Akshay Jain, Anubhav Rai, Y. K. Bajpai |
| Institution | : | Research Scholar, Department of Civil Engineering, G.G.I.T.S. Jabalpur, M.P, India |
| Published In | : | Vol. 5, Issue 4 — April 2018 |
| Page No. | : | 2391-2397 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
In this research the study of compressive strength and flexural strength of concrete as partial replacementof cement by Iron ore tailing and Ground Granulated blast furnace slag is carried out. The study is done by replacingcement (by weight) individually by Iron ore tailing 0%, 5%, 10%, 15% for , individually Ground granulated blastfurnace slag 0%, 5%, 10%, 15% and together by both Iron ore & Ground granulated blast furnace slag for 0%, 5%,10%, 15% for M-25 grade. For Compressive strength test 120 cubes were casted of size 150mm x 150mm x 150mm for7,14, 21 and 28 days. For flexural strength test 30 beams were casted of size 150mm x 150mm x 700mm for 28 days.The test for compressive strength and flexural strength has been done and results are shown in graph. Graphs are plottedbetween flexural strength and compressive strength and percentages of IOT & GGBFS.This research has shown that the IOT and GGBFS have the potential to produce high strength concrete at reasonablecost. As the graphs showing increasing slope indicating strength is achieved by replacing cement by IOT & GGBFS atdifferent percentages.
Akshay Jain, Anubhav Rai, Y. K. Bajpai, ““STUDY ON PARTIAL REPLACEMENT OF CEMENT WITH IRON ORE MINE TAILING AND GROUND GRANULATED BLAST FURNACE SLAG””, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 5, Issue 4, pp. 2391-2397, April 2018.
