Review on structural, contact and modal analysis on femur bone using different plate material under varying fracture condition
| Author(s) | : | Goswami Akshay Kumar, Dr. P.K. Sharma |
| Institution | : | M. Tech Scholar, Department of Mechanical Engineering NRI, Bhopal |
| Published In | : | Vol. 7, Issue 7 — July 2020 |
| Page No. | : | 71-77 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
In human anatomy the femur may be the largest and longest bone however most powerful in compressiononly. The femur is responsible to put up with the most significant percentage of weight during ordinary weight bearingactivities. Femur bone fracture is just one of the usual traumas. When designing bone stripes design, fabric selection,and biocompatibility are the three important considerations. The bone plate must be strong enough to support the loadnormally put on the bone while the bone heals. The principal goal of the present work is to analyze the cracked femurbone that's cracked in midst of the shaft and supported by prosthetic plate and the relative analysis with differentmaterial for single fracture position. In the current work a 3-dimensional CAD version of Femur bone with locking andplate screw is made up of the help of CATIA software then erased in ANSYS work-bench for further investigation. Fromthe current work passing structural, touch and modal analysis on femur bone together with plate gathering for differentstructure and different substances are performed.
Goswami Akshay Kumar, Dr. P.K. Sharma, “Review on structural, contact and modal analysis on femur bone using different plate material under varying fracture condition”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 7, Issue 7, pp. 71-77, July 2020.
