Obtained Different Solutions To Prevent Damege Of Hoisting Equipments In Manufecturing Industry By Fresh Review
| Author(s) | : | Nishadevi N. Jadeja, Ghanshyam R. Patel, Vimalkumar G. Rathod, Nileshkumar V. Parmar |
| Institution | : | Assistant Professor,Mechanical Engineering Department,Government Engineering college Bhavnagar,Gujrat |
| Published In | : | Vol. 4, Issue 9 — September 2017 |
| Page No. | : | 4-7 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
Cranes play important role in heavy industries. It is important to design and install a crane properly for safetyof persons and other equipment s in industry. Continuous use of crane hooks and hoisting equipment s increases themagnitude of wear and stresses and eventually results in failure of the hook and crane. It may be prevented if the stressconcentration areas are well predicted and some design modification is made to reduce the stresses in these areas. Thusthe aim of this work is obtained different solutions fordesigning a crane and hook. different solutions are suggestedbased on technical analysis are in following review papers
Nishadevi N. Jadeja, Ghanshyam R. Patel, Vimalkumar G. Rathod, Nileshkumar V. Parmar, “Obtained Different Solutions To Prevent Damege Of Hoisting Equipments In Manufecturing Industry By Fresh Review”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 4, Issue 9, pp. 4-7, September 2017.
