PARAMETRIC STUDY OF COLD-FORMED STEEL LIPPED CHANNEL COLUMN SECTION
| Author(s) | : | Khyati A. Patel, Hitesh K. Dhameliya, Krutarth S. Patel |
| Institution | : | M.Tech Structural Engineering Student, CGPIT, Bardoli, Gujarat, India |
| Published In | : | Vol. 5, Issue 4 — April 2018 |
| Page No. | : | 1344-1350 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
Usage of cold formed steel structural components for buildings and structures is gaining popularity in Indiafor a decade. Most effective use of Cold-formed steel can be made for different purposes since they are economical inproduction. This paper presents the details of the finite strip models developed to investigate the buckling behaviour ofcold-formed steel column. Cold-formed steel is vulnerable to buckling due to its thinner section which affects the strengthof the section. In order to assess the influence of buckling, four thicknesses (1.2mm, 2mm, 3.15mm, 4mm) were chosen.Finite strip analysis was performed using CUFSM software. Parametric studies have been conducted for ratio of webheight to flange width and ratio of lip length to flange width
Khyati A. Patel, Hitesh K. Dhameliya, Krutarth S. Patel, “PARAMETRIC STUDY OF COLD-FORMED STEEL LIPPED CHANNEL COLUMN SECTION”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 5, Issue 4, pp. 1344-1350, April 2018.
