Optimization of Cutting Parameters for facing Operation – A review Using Taguchi Method
| Author(s) | : | Suhas A. Rewatkar, Shahbaz S.Khan, Talha M. Khan, Prasad P. Chitnavis |
| Institution | : | Asst. Professor, Department Of Mechanical Engineering, JD College of Engineering & Management Nagpur – 441501, Maharashtra |
| Published In | : | Vol. 5, Issue 3 — March 2018 |
| Page No. | : | 38-40 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
In this paper an effort is made to review the literature on optimization of cutting parameters in machining withthe assist of Taguchi Method. The mean of this research is to decide the cutting tool and the optimum cutting situationrequired for the metal cutting of these materials. The significant cutting parameters in turning process mostly cuttingspeed, feed rate, depth of cut, spindle speed affect the surface finish of the material. Orthogonal arrays of Taguchi, thesignal-to-noise (S/N) ratio, the analysis of variance (ANOVA) are employed to find the optimal levels and to study theoutcome of the cutting parameter.
Suhas A. Rewatkar, Shahbaz S.Khan, Talha M. Khan, Prasad P. Chitnavis, “Optimization of Cutting Parameters for facing Operation – A review Using Taguchi Method”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 5, Issue 3, pp. 38-40, March 2018.
