Design of Experiment Via Taguchi Method For Machining Of AISI D2 Tool Steel In CNC Milling Machine Process
| Author(s) | : | Ravi D. Patel, Nigam V. Oza |
| Institution | : | Lecturer in Mechanical Engineering Department, K. D. Polytechnic, Patan |
| Published In | : | Vol. 3, Issue 12 — December 2016 |
| Page No. | : | 244-247 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
Hardness greater than 45 HRC, but in general ranges of hardness 53 to 58 HRC, reaching a maximum of 65HRC, is called "hard machining".By using CNC milling process, a hard machining process provides susceptible benefitsin terms of low manufacturing cost with less time compared to traditional machining.Coated tools are generally acceptedthat coating enhances the oxidation resistance and lubricity of the tool, protects the tool against diffusion wear, andreduces the temperature variation in the tool, rendering it less susceptible to crack. In this paper, TiAlN coated tool isused for machining of AISI D2 tool steel.L-9 orthogonal array is used for experimental work. Taguchi method has beenused after experimental work to findout most important affected input parameter.
Ravi D. Patel, Nigam V. Oza, “Design of Experiment Via Taguchi Method For Machining Of AISI D2 Tool Steel In CNC Milling Machine Process”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 3, Issue 12, pp. 244-247, December 2016.
