Experimental Investigation and Finite Element Analysis of Boring Tool vibration by using passive damper
| Author(s) | : | D.M.Wadhwankar, Kiran More, Jadhav Nitin.R |
| Institution | : | Mechanical Engg Department,Alard College of Engineering, Marunje, Pune |
| Published In | : | Vol. 3, Issue 12 — December 2016 |
| Page No. | : | 171-178 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
Boring is a commonly used operation to enlarge the existing holes of machine structures. When boring toolis slender and long, it is subjected to excessive static deflections or a self-excited chatter vibration which reduces theaccuracy and surface finish of the hole. It also causes accelerated wear and chipping of the tool. Internal turningfrequently requires a long and slender boring tool in order to machine inside a cavity, and the vibrations generallybecome highly correlated with one of the fundamental bending modes of the boring tool. use of passive Damper ofdifferent orientation reduces vibration level in Boring tool & tool holder &work piece to be enlarging hole improvingsurface finish. Furthermore, the interface between the boring tool and the clamping house has a significant influence onthe dynamic properties of the clamped boring tool. This report focuses on the behavior of a boring tool that arises underdifferent overhang lengths which are commonly used in the manufacturing industry.
D.M.Wadhwankar, Kiran More, Jadhav Nitin.R, “Experimental Investigation and Finite Element Analysis of Boring Tool vibration by using passive damper”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 3, Issue 12, pp. 171-178, December 2016.
