Optimization of Process Parameters for MRR and Machining Time in Turning Process: A Review
| Author(s) | : | Mr.Swapnil Lambe, Mr.Dnyaneshwar Vaidhya, Mr.Sagar Bhosale, Mr.Prashant Galatage, Mr. Hariprasad Chavan |
| Institution | : | Department of Mechanical Engineering, Adarsh Institute of Technology and Research Centre, Vita, India |
| Published In | : | Vol. 3, Issue 10 — October 2016 |
| Page No. | : | 83-87 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
The challenge of new industry of modern machine industries is mainly focus on achieving high quality, component accuracy, surface finish, high production rate and increase the product life with lesser environmental. Similarly workpiece material which plays an important role in metal cutting parameter. In this study, focuses on the optimization of turningparameters using the Taguchi technique to obtain minimum machining time and maximum material removal rate. A numberof turning experiments will conduct using the orthogonal array on computerized numerical control. The ex-periments is performing on mild steel bar using high speed steel tool under dry cutting conditions. The measured results are collects andanalyze with the help of the commercial software. Analysis of variance is employed to determine the most significant controlfactors affecting the machining time and material removal rate. The spindle speed, feed rate and depth of cut are selected ascontrol factors.
Mr.Swapnil Lambe, Mr.Dnyaneshwar Vaidhya, Mr.Sagar Bhosale, Mr.Prashant Galatage, Mr. Hariprasad Chavan, “Optimization of Process Parameters for MRR and Machining Time in Turning Process: A Review”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 3, Issue 10, pp. 83-87, October 2016.
