Design And Manufacturing of Double Pipe Heat Exchanger
| Author(s) | : | Archit Patel, Vinit Patel, Chintan Bhatt, Chirag Singapuri, Urvin Patel |
| Institution | : | U.G. Student,Mechanical Engineering Department, Chhotubhai Gopalbhai Patel Institute of Technology, Bardoli, Surat, India |
| Published In | : | Vol. 3, Issue 7 — July 2016 |
| Page No. | : | 64-68 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
The design of double pipe heat exchanger for the laboratory used is aim to carry out the design of heatexchanger using data available from experiment and literature. The heat exchanger is aimed to manufacture and toprepare a experimental setup by means of this setup one can perform a practical work to understand concept of heatexchanger. Mild steel pipes are used for preparation of setup in both pipes. The effectiveness of this setup would betargeted between 10 to 20 as the losses and human errors are concerned
Archit Patel, Vinit Patel, Chintan Bhatt, Chirag Singapuri, Urvin Patel, “Design And Manufacturing of Double Pipe Heat Exchanger”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 3, Issue 7, pp. 64-68, July 2016.
