DESIGN AND THEORETICAL ANALYSIS OF SINGLE PLATE CLUTCH BY VARYING FRICTION LINING MATERIALS
| Author(s) | : | Prof. Jignesh J. Patel, Mr. Kaushal R. Ajmera, Mr. Raghav K. Thanki, Mr. Rohit B. Maitar |
| Institution | : | (Head of Department), Department of mechanical engineering , Dr. Subhash Technical Campus, Junagadh |
| Published In | : | Vol. 2, Issue 11 — November 2015 |
| Page No. | : | 68-72 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
This research paper has been related to the friction lining material in clutch plate. There are manymaterials available in market like, Asbestos, Ceramic-metal, organic fabric, cast iron, sintered metal etc. but According tomarket survey ASBESTOS is normally used as a friction lining material in clutch plate. But there are few problems inasbestos friction plate like, high heat-generation and low co-efficient of friction. So, there is requirement of change thematerial in clutch plate. Firstly change the friction lining material and redesign the clutch plate and after that differentexperiment will be carried out with the different material in clutch plate. Here mainly focus on increasing torquetransmission capacity of clutch plate. According to results of different experiments, choose the best material for frictionlining of clutch plate.
Prof. Jignesh J. Patel, Mr. Kaushal R. Ajmera, Mr. Raghav K. Thanki, Mr. Rohit B. Maitar, “DESIGN AND THEORETICAL ANALYSIS OF SINGLE PLATE CLUTCH BY VARYING FRICTION LINING MATERIALS”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 2, Issue 11, pp. 68-72, November 2015.
