Investigation of Cutting Force and Tool Wear Behaviour in Dry Turning of Inconel 625
| Author(s) | : | Deep D. Vadalia, Alpesh H. Makwana |
| Institution | : | P.G. Student, M.E. (CAD/CAM), Government Engineering College Dahod |
| Published In | : | Vol. 2, Issue 5 — May 2015 |
| Page No. | : | 539-547 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
— Central Composite Design has been used to study the effect of the turning parameters such as spindle speed,feed rate and depth of cut on the feed force, cutting force and flank wear acting on the cutting tool while dry turningInconel 625. A mathematical prediction model of the output responses were developed in terms of above parameters. Theeffect of these parameters on the surface roughness has been investigated by using Response Surface Methodology(RSM). Response surface contours were constructed for determining the optimum conditions for a required outputresponse. The developed predicted equation showed that feed rate is the main factor followed by depth of cut thatinfluences the response. It was observed that there was a significant increase in response parameters with increase ininput parameters.
Deep D. Vadalia, Alpesh H. Makwana, “Investigation of Cutting Force and Tool Wear Behaviour in Dry Turning of Inconel 625”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 2, Issue 5, pp. 539-547, May 2015.
