OPTIMIZATION OF ABS P430 MATERIAL MADE OF FUSED DEPOSITION MODELING (FDM) USING TAGUCHI METHOD
| Author(s) | : | Niteen P Brahmbhatt, Mr. Vikram V Patel, Miss. Mittal P Brahmbhatt |
| Institution | : | P.G. Student, Merchant Engineering College, Basna, Mahesana, India |
| Published In | : | Vol. 2, Issue 6 — June 2015 |
| Page No. | : | 635-643 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
The present study illustrates the performance of ABS P430 Material Made of Fused Deposition Modeling(FDM). The effect of FDM parameter of Surface Roughness, Tensile Strength and Percentage of Elongation isinvestigated. The experiments were conducted with two different parameters such as Layer thickness and air gap. Theprocess parameters are optimized by using Taguchi method and the effect of these process parameters on SurfaceRoughness, Tensile Strength and Percentage of Elongation was evaluated by the analysis of variance. The analysisshows that the parameter that have the biggest effect on Surface Roughness, Tensile Strength and Percentage ofElongation is Layer Thickness.
Niteen P Brahmbhatt, Mr. Vikram V Patel, Miss. Mittal P Brahmbhatt, “OPTIMIZATION OF ABS P430 MATERIAL MADE OF FUSED DEPOSITION MODELING (FDM) USING TAGUCHI METHOD”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 2, Issue 6, pp. 635-643, June 2015.
