OPTIMUM PARAMETERS FOR DESIGN OF RICE POLISHER: A REVIEW
| Author(s) | : | Pritam Kudale, N. P. Awate, Vijay Sonkusare |
| Institution | : | Student M.Tech CAD/CAM, GHRCE, Nagpur- 440016, India |
| Published In | : | Vol. 2, Issue 2 — February 2015 |
| Page No. | : | 224-229 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
Quality of rice after milling process is depends on various factors, which include paddy drying, paddyharvesting parameters, environmental conditions, physical properties of Rice, type of rice and quality of polishingmachine component. The objective of this paper is to identify the optimum parameter to achieve uniformly polished yieldof rice with less broken. The selection of vertical and horizontal machine to design has large effect on the head rice yieldand vertical design is mostly preferred. The optimum moisture content of paddy rice for milling process was reviewedand it is observed to be varied according to the variety of rice grain and it had the least rice breakage when using 3abrasive polishers in series followed by one friction polisher. Another parameter is cylinder speed, when cylinder speedis increase from 600 to 1000 RPM, the percentage of broken kernels approximately gets doubled. Rice polishing cylindermaterial of contains two composite materials were binder material and abrasive material
Pritam Kudale, N. P. Awate, Vijay Sonkusare, “OPTIMUM PARAMETERS FOR DESIGN OF RICE POLISHER: A REVIEW”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 2, Issue 2, pp. 224-229, February 2015.
