UWB PRINTED SLOT ANTENNA WITH DUAL NOTCH BANDS
| Author(s) | : | Anil Kumar Gupta, Niraj Kumar |
| Institution | : | M.Tech 1ST year (2013-2015),School of Electronics Engineering, VIT University, Chennai, India |
| Published In | : | Vol. 1, Issue 11 — November 2014 |
| Page No. | : | 18-22 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
UWB printed slot antenna is a vital use these days for the commercial applications. The UWB slot antenna,covering 3.1–11 GHz, is in the shape of an octagon and is fed by a rectangular patch with a bevelled bottom edge [1].This paper will present the simulation analysis of slot antennas using different frequencies for bandwidths enhancement.Used to UWB with dual notch band techniques to solve the problem of antenna bandwidth in mobiles, wireless,Bluetooth, WI-FI,WI-MAX,W-LAN and broadband etc. These techniques are used to enhance the bandwidt h andefficiency of antenna. Some approaches for notch bands are introduction of slots in UWB antenna. The effect of notchband in various antenna parameters like, radiation, efficiency, gain and bandwidth are discussed. Finally the paperreports a brief description bandwidth enhancement of antenna by using three different frequencies and micro strip feedline on substrate with a finite size of ground plane .this slot antenna supports 2500MHz , 3500MHz and 5800MHzfrequencies .simulation operations demonstrate that optimum results of antenna and radiation characteristics have beensuccessfully done for UWB slot antenna.
Anil Kumar Gupta, Niraj Kumar, “UWB PRINTED SLOT ANTENNA WITH DUAL NOTCH BANDS”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 1, Issue 11, pp. 18-22, November 2014.
