Analysis of Masonry Infilled Frame with &without Different Percentage of Opening
| Author(s) | : | Pooja V. Raut, Nikhil S.Agrawal, Prof. P .B Kulkarni |
| Institution | : | 1Civil Engineering, Prof. Ram Meghe Institute of Technology & Research Badnera |
| Published In | : | Vol. 1, Issue 8 — August 2014 |
| Page No. | : | 70-77 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
In the analysis and design of building frames it is commonly assumed that the masonry infill which acts as anon structural elements do not contribute to their strength and stiffness. But as a matter of fact, behavior of the structureis affected by non structural elements in earthquake loads, thus a mathematical model is required to design structures.The deficiencies in current approach of modeling are more pronounced during dynamic response such as in the event ofearthquake. Thus contribution of non structural elements needs to be accounted for realistically. The scope of the presentstudy is limited to masonry in filled RC frames with and without opening. In this paper collage building (g+3) and (g+5)located in seismic zone III is considered by modeling of frame and infill. The infill panels are modeled as a diagonalstruts and surrounding frames as a frame elements. Static analysis is carried out on the models such as bare frame, strutframe, strut frame with centre and corner opening and are performed by software Staad -Pro from which differentparameters are computed.
Pooja V. Raut, Nikhil S.Agrawal, Prof. P .B Kulkarni, “Analysis of Masonry Infilled Frame with &without Different Percentage of Opening”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 1, Issue 8, pp. 70-77, August 2014.
