REDUCTION IN DYNAMIC LOAD IN RC CHIMNEY BY STRAKES PROVISIONS
| Author(s) | : | KANDARP BADIANI, PROF. K.C. KORADIA |
| Institution | : | Research Scholar, Darshan Institute Of Engineering and Technology, Hadala, Rajkot, mr.kmbadiani@rediffmail.com |
| Published In | : | Vol. 1, Issue 5 — May 2014 |
| Page No. | : | 386-389 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
The Industrial growth of the any developing country like India is fast but thedevelopment of Research Centers are not supporting the development specially in aspecial structures like RC chimney, The effect of Aerodynamic Interference in chimneyspecially provided in cluster with their distance is within the 20 times 2/3 of top diameter . Alsowhen the Height of RC chimney is increasing to fulfill the norms of Pollution control Board.This increase in height of RC chimney will increase the dynamic wind load pressure which alsorequires to reduce these loading as in case of cluster of chimney. To reduce this dynamic loadingwe can reduce the effective design moments at the base of chimney by strakes provisions at top1/3 height to 1/2 height of chimney to ensure stability and safety. The idea about both tallidentical chimney and cluster of chimney is shown in the paper to help the designer aboutsafety and economy and thus helping to maintain the standard of PCB.
KANDARP BADIANI, PROF. K.C. KORADIA, “REDUCTION IN DYNAMIC LOAD IN RC CHIMNEY BY STRAKES PROVISIONS”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 1, Issue 5, pp. 386-389, May 2014.
