OPTIMIZATION OF CUTTING PARAMETERS FOR DRY TURNING OF EN9 STEEL WITH MTCVD MULTICOATED CARBIDE INSERT USING TAGUCHI METHOD
| Author(s) | : | Mittal P Brahmbhatt, Mr. Ankit R Patel, Mr. Priyank S Panchal |
| Institution | : | P.G. Student, Sardar Patel Institute of Technology, Piludara, Mahesana, India,mittal211@gmail.com |
| Published In | : | Vol. 1, Issue 5 — May 2014 |
| Page No. | : | 33-41 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
The present study illustrates the performance of MTCVD multicoated carbide insertin dry turning of EN9 steel. The effect of insert and cutting parameter on surface roughness andMRR is investigated. The experiments were conducted at three different spindle speed, feed anddepth of cut. The cutting parameters are optimized using Taguchi method and the effect ofcutting parameters and tool material on surface roughness was evaluated by the analysis ofvariance. The analysis indicated that the parameter that have the biggest effect on surfaceroughness and MRR is feed.
Mittal P Brahmbhatt, Mr. Ankit R Patel, Mr. Priyank S Panchal, “OPTIMIZATION OF CUTTING PARAMETERS FOR DRY TURNING OF EN9 STEEL WITH MTCVD MULTICOATED CARBIDE INSERT USING TAGUCHI METHOD”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 1, Issue 5, pp. 33-41, May 2014.
