BANK LOCKER OPENING SYSTEM USING RFID

Authors

  • KAVITHA B C Assistant Professor Dept of ECE BGSIT BG Nagar
  • SHILPA D P Students Dept of ECE BGSIT BG Nagar
  • THANUSHREE K S Students Dept of ECE BGSIT BG Nagar
  • SWATHI A M Students Dept of ECE BGSIT BG Nagar
  • RANJITHA M K Students Dept of ECE BGSIT BG Nagar

Keywords:

GSM.RFID, locking system, Keyboard, Microcontroller

Abstract

The main goal of this paper is to design and implement a bank locker security system based on RFID and
GSM technology which can be organized in bank, secured offices and homes. In this system only authentic person can be
recovered money from bank locker. We have implemented a bank locker security system based on RFID and GSM
technology containing door locking system using RFID and GSM which can activate, authenticate, and validate the user
and unlock the door in real time for bank locker secure access. The main advantage of using passive RFID and GSM is
more secure than other systems. This system consists of microcontroller, RFID reader, GSM modem, keyboard, and
LCD, in this system The RFID reader reads the id number from passive tag and send to the microcontroller, if the id
number is valid then microcontroller send the SMS request to the authenticated person mobile number, for the original
password to open the bank locker, if the person send the password to the microcontroller, which will verify the
passwords entered by the key board and received from authenticated mobile phone. if these two passwords are matched
the locker will be opened otherwise it will be remain in locked position, This system is more secure than other systems
because two passwords required for verification. This system also creates a log containing check-in and check-out of
each user along with basic information of user.

Published

2018-04-25

How to Cite

KAVITHA B C, SHILPA D P, THANUSHREE K S, SWATHI A M, & RANJITHA M K. (2018). BANK LOCKER OPENING SYSTEM USING RFID. International Journal of Advance Engineering and Research Development (IJAERD), 5(4), 2412–2418. Retrieved from https://www.ijaerd.org/index.php/IJAERD/article/view/5506