ANALYSIS ON TOTAL HEAT FLUX OF CIRCULAR FIN

Authors

  • Prof.Pragnesh.D.Kandoliya Mechanical Engineering Department , Vadodara Institute of Engineering, Kotambi, Vadodara, India

Keywords:

Total Heat flux, temperature, fin

Abstract

Fin is widely used in the industry. The efficiency of component depends on the fin performance. This research
paper is exposed the total heat flux analysis of brass fin. ANAYS fluent is used for analysis. Length of the fin is 0.125m.
Diameter of the fin is 0.012m. Brass is selected as martial of the fin. Simulation is done in the natural convection. The result
shows the temperature distribution and total heat flux through the circular brass fin for 360sec duration. ANSYS fluent
analysis shows the performance chart of fin. Finally, Maximum Total heat flux is 23575 W/m2
at 80.369 oC temperature.

Downloads

Published

2018-04-25

How to Cite

Prof.Pragnesh.D.Kandoliya. (2018). ANALYSIS ON TOTAL HEAT FLUX OF CIRCULAR FIN. International Journal of Advance Engineering and Research Development (IJAERD), 5(4), 2494–2497. Retrieved from https://www.ijaerd.org/index.php/IJAERD/article/view/3377

Issue

Vol. 5 No. 4 (2018): Volume 5 Issue 4 April 2018

Section

Articles