DESIGN AND ANALYSIS OF RADIAL FLOW TURBO CHARGER TURBINE USING DIFFERENT MATERIALS

Authors

  • KADIMI NAVEEN M.Tech Student, Dept. Of Mechanical Engineering, Aims College Of Engineering, Amalapuram.
  • GUTHULA.SATISH Assistant Professor, Dept Of Mechanical Engineering, Aims College Of Engineering, Amalapuram

Keywords:

Turbocharger turbine, radial flow, static and thermal analysis, material modification

Abstract

A turbocharger is a mechanical device which is driven by exhaust gases and it increases engine power by
pumping compressed air into the combustion chambers. The main parts of the turbocharger are turbine and central housing
assembly. This present work is aimed to analyze the Static and thermal conditions of radial flow turbocharger turbine wheel
for three different materials. A single blade in the turbine wheel has been considered for analysis. Finally find out strength
based on static conditions (stress, strain, deformation, shear stress). In thermal point of view temperature distribution and
total heat flux is calculated the heat flux values are predicted by performing numerical analysis for Inconel 740, Inconel 625
and Incoloy 909 materials finally concluded the suitable material on these three materials. Turbine blade of 170 mm length is
also predicted to have the maximum heat flux.

Downloads

Published

2018-08-25

How to Cite

KADIMI NAVEEN, & GUTHULA.SATISH. (2018). DESIGN AND ANALYSIS OF RADIAL FLOW TURBO CHARGER TURBINE USING DIFFERENT MATERIALS. International Journal of Advance Engineering and Research Development (IJAERD), 5(8), 41–51. Retrieved from https://www.ijaerd.org/index.php/IJAERD/article/view/3788

Issue

Vol. 5 No. 8 (2018): Volume 5 Issue 8 August 2018

Section

Articles