DESIGN AND ANALYSIS OF AN OFF-SET FIN IN A RADIATOR

Authors

  • B.Dhanasakkaravarthi Associate Professor Department of Mechanical Engineering
  • K.Balasubramanian Associate Professor Department of Mechanical Engineering
  • I . Paul Theophilus Rajakumar Professor Department Of Mechanical Engineering
  • V. Vinod Kumar Assistant Professor Department of Mechanical Engineering, Panimalar Institute Of Technology, Poonamllee, Tamilnadu, Chennai-123
  • S.Santhosh Kumar Assistant Professor Department of Mechanical Engineering, Panimalar Institute Of Technology, Poonamllee, Tamilnadu, Chennai-123

Keywords:

Radiator, flow rate, surface of fin

Abstract

Heat exchangers are used in various machineries to transfer heat from a hot body to a cold body. They are used in
automobiles, solar powered equipment’s and general equipment’s where transfer of heat is mandatory for better efficiency of
the machine. The efficiency of the radiator mainly depends on the flow rate of the cooling liquid, velocity of air & the surface
area of fin. In this project the efficiency of the radiators are compared for the various surface of the fin by changing the
geometry of the fin.

Downloads

Published

2018-04-25

How to Cite

B.Dhanasakkaravarthi, K.Balasubramanian, I . Paul Theophilus Rajakumar, V. Vinod Kumar, & S.Santhosh Kumar. (2018). DESIGN AND ANALYSIS OF AN OFF-SET FIN IN A RADIATOR. International Journal of Advance Engineering and Research Development (IJAERD), 5(4), 2443–2447. Retrieved from https://www.ijaerd.org/index.php/IJAERD/article/view/3370

Issue

Vol. 5 No. 4 (2018): Volume 5 Issue 4 April 2018

Section

Articles