EXPERIMENTAL INVESTIGATION AND ANALYSIS OF THRUST (PART) IN V4 SUBMERSIBLE PUMP-A REVIEW

Authors

  • Asst. Prof. Biren J. Saradava Department of Mechanical Engineering, Atmiya Institute of Technology and science-Rajkot
  • Mr. Dhaval P. Vaishnav Department of Mechanical Engineering, Atmiya Institute of Technology and science-Rajkot
  • Mr. Vimal C. Tadhani Department of Mechanical Engineering, Atmiya Institute of Technology and science-Rajkot
  • Mr. Bhardvaj H. Rangpariya Department of Mechanical Engineering, Atmiya Institute of Technology and science-Rajkot

Keywords:

Efficiency, overloading, thrust bearing, overheating, reduce defects

Abstract

Pumps are used in many industrial, commercial, agriculture, and residential application of particular in
handing water. So it is quite necessaryto find out the defect in all parts like, bearing, thrust, shaft, etc. But we are more
concentrated on thrust part of the submersible pump. The entire paper work is deal with defect in thrust. A thrust is failed
due to overloading, overheating, etc. by modifying material of thrust with the help of experimental investigation. By
changing material, efficiency of the submersible pump could be increases. Finally, analysis could be done on same.

Downloads

Published

2014-11-25

How to Cite

Asst. Prof. Biren J. Saradava, Mr. Dhaval P. Vaishnav, Mr. Vimal C. Tadhani, & Mr. Bhardvaj H. Rangpariya. (2014). EXPERIMENTAL INVESTIGATION AND ANALYSIS OF THRUST (PART) IN V4 SUBMERSIBLE PUMP-A REVIEW. International Journal of Advance Engineering and Research Development (IJAERD), 1(11), 55–56. Retrieved from https://www.ijaerd.org/index.php/IJAERD/article/view/319

Issue

Vol. 1 No. 11 (2014): Volume 1 Issue 11 (November-2014)

Section

Articles