CFD Simulation of Down Drought Biomass Gasifier

Authors

  • R. Ravi Kumar Assistant Professor, Department of Mechanical Engineering, MVSR, Hyd, Telangana.
  • M. Narendhar Baba Assistant Professor, Department of Mechanical Engineering, NNRESGI, Hyd, Telangana.
  • K. Suresh Kumar Assistant Professor, Department of Mechanical Engineering, NNRESGI, Hyd, Telangana.
  • A. Venkata Vishnu Assistant Professor, Department of Mechanical Engineering, NNRESGI, Hyd, Telangana.

Keywords:

Biomass, CFD, Gasification, CATIA, Airflow Analysis, Temperature Distribution, ANSYS CFX, etc.

Abstract

Biomass is considered to be one of the most promising renewable energy sources in the present scenario. Due to stringent policy on emission reduction, biomass has become a centre of attention worldwide as a source of green energy. The gasification technology is now considered to be in an advanced stage of development. Hence there is huge expectation from the user industry for its application. The present work has been carried out in order to perform CFD simulation in Biomass Gasification process, for this purpose a down draft biomass gasifier system is designed using empirical data and derived quantities in CATIA, changes made in the Model of reduction chamber with 30° inclination angle considering 4 number of nozzles. In this paper airflow analysis and temperature distribution across the chamber of gasification products has been analyzed by CFD method using ANSYS CFX 11.0 software.

Downloads

Published

2022-02-01

Issue

Vol. 3 No. 1 (2016): Volume 3 Issue 1 January -2016

Section

Articles

How to Cite

CFD Simulation of Down Drought Biomass Gasifier. (2022). International Journal of Advance Engineering and Research Development (IJAERD), 3(1), 58-64. https://www.ijaerd.org/index.php/IJAERD/article/view/860

Similar Articles

1-10 of 2234

You may also start an advanced similarity search for this article.