Reduce Air pollution of co2 in Chimney using DC High Voltage (4 kV)

Authors

  • Maradiya Nikunj Electrical Engineering, Babaria institute of technology
  • Kyada Navni Electrical Engineering, Babaria institute of technology
  • Khokhariya Gaurav Electrical Engineering,Babaria institute of technology
  • Dr. Dipesh Patel Electrical Engineering,Babaria institute of technology

Keywords:

High voltage generation method, Voltage multiplier, potential divider, Karl mark c ircuit, Separation method of co2.

Abstract

The project is designed to develop High Voltage dc around 4kv from supply source of 230 V AC using
capacitors and diodes in Karl Marx circuit. The output from this circuit is used to separate carbon and oxygen from its
molecule compound from co2, which was being emitted to atmosphere through Chimney.
The design of the circuit involves Voltage Multiplier, whose principle is to go on doubling the voltage for each stage.
Potential divider of 10:1 is measuring the output of Karl Marx circuit i.e. if output is 4kv it shows 400 V in multimeter.
This concept of generation is used in electronic appliances like the cathode rays tubes, TV picture tubes, and
oscilloscope and used in Industrial application

Downloads

Published

2015-04-25

How to Cite

Maradiya Nikunj, Kyada Navni, Khokhariya Gaurav, & Dr. Dipesh Patel. (2015). Reduce Air pollution of co2 in Chimney using DC High Voltage (4 kV). International Journal of Advance Engineering and Research Development (IJAERD), 2(4), 375–377. Retrieved from https://www.ijaerd.org/index.php/IJAERD/article/view/645

Issue

Vol. 2 No. 4 (2015): Volume 2 Issue 4, April 2015

Section

Articles