REVIEW OF CONCRETE BY USING MANUFACTURED SAND AND RECYCLED COARSE AGGREGATE

Authors

  • Jaydeep Vashi Department of Civil Engineering, Chhotubhai Gopalbhai Patel Institute of Technology
  • Gunvant Solanki Department Of Civil Engineering, Chhotubhai Gopalbhai Patel Institute Of Technology
  • Vyom Patahk Department Of Civil Engineering, S. N. Patel Institute of Technology & Research Centre

Keywords:

Manufactured sand, Recycled Coarse Aggregate, Workability, Compressive Strength and Flexural Strength

Abstract

Re-Use of Concrete Waste as Recycled Coarse Aggregate in Concrete Grade of M-15 & M-20.Use of
Manufactured Sand in Replacement of Natural Sand in Concrete.To Study The Different Properties Like Workability,
Compressive Strength and Flexural Strength of Fresh and Hardened Concrete and also Compare abov e Said Properties
with Normal Concrete. If We achieve Desire Strength in M-20 Mix Concrete then We can use this Concrete In Pavements
to Make C.C Roads in Required Area and if we achieve M-15 grade then we can use this concrete for P.C.C Work.By
Using Such Concrete of Recycle Coarse Aggregate & Manufacture Sand we Save natural Source of aggregate.

Downloads

Published

2014-11-25

How to Cite

Jaydeep Vashi, Gunvant Solanki, & Vyom Patahk. (2014). REVIEW OF CONCRETE BY USING MANUFACTURED SAND AND RECYCLED COARSE AGGREGATE. International Journal of Advance Engineering and Research Development (IJAERD), 1(11), 251–256. Retrieved from https://www.ijaerd.org/index.php/IJAERD/article/view/349

Issue

Vol. 1 No. 11 (2014): Volume 1 Issue 11 (November-2014)

Section

Articles