Optimization of tool life & determination of equation to setup inventory by performing experiments on different materials using CNC lathe machine

Authors

  • Asst. Prof. Killol Kothari Mechanical department, Venus International College of Technology, Gandhinagar
  • Asst. Prof. Purusharth Patel Mechanical department, Venus International College of Technology, Gandhinagar
  • Asst. Prof. Nikunj Modh Mechanical department, Venus International College of Technology, Gandhinagar

Keywords:

Tool Life; Regression Analysis; Dry v/s Wet coolant, EN9 EN31 Aluminum Alloy; CNC lathe machine

Abstract

In the current manufacturing industries, cost of the product is most important parameter and there are too
many parameters that effects such as tool Life, Production of the component, Product quality , etc. From all above
parameter, tool life directly effects on the product quality and productivity of the product. Tool life is a number of
products machined between the two grinding of the cutting tool; we have determined the tool life by the method of design
of experiment. In this paper, various cutting parameter as cutting speed, depth of cut and feed rate of the cutting tool has
been taken into the account along with two different conditions as dry and wet coolant conditions and the material of the
product are changed as Aluminium alloy, EN-9 and EN-31. Then the observed data has been studied on the Minitab
software to develop the equation based on the material parameter.

Downloads

Published

2014-11-25

How to Cite

Asst. Prof. Killol Kothari, Asst. Prof. Purusharth Patel, & Asst. Prof. Nikunj Modh. (2014). Optimization of tool life & determination of equation to setup inventory by performing experiments on different materials using CNC lathe machine. International Journal of Advance Engineering and Research Development (IJAERD), 1(11), 67–74. Retrieved from https://www.ijaerd.org/index.php/IJAERD/article/view/322

Issue

Vol. 1 No. 11 (2014): Volume 1 Issue 11 (November-2014)

Section

Articles