PARTIAL REPLACEMENT OF SAND BY STEEL SLAG IN TILES

Authors

  • G.BALAJI.M.E Assistant professor, Departement of civil engineering , Roever Engineering College, Perambalur.
  • MANIKANDAN.R Student department of civil engineering , Roever Engineering College, Perambalur
  • SOUNDERRAJAN.S Student department of civil engineering , Roever Engineering College , Perambalur.
  • SURESH.S Student department of civil engineering , Roever Engineering College, Perambalur.
  • TAMIL SELVAN Student department of civil engineering , Roever Engineering College , Perambalur

Keywords:

White cement, Fine aggregate, Steel slag, Pigments.

Abstract

In this project we are making cement mortar tiles. The specialty of these tiles are instead of sand we
are using steel slag partially for making. The mixed ratio is 1:3 and the size of the tiles are 300x300x20 mm. The
main advantage of the replacement is the increase of compressive strength and reduce in self-weight. Colour
pigments are used for different types of colours. Use of steel slag lead to reduce the level of water absorption
upto10%.

Downloads

Published

2017-04-25

Issue

Vol. 4 No. 4 (2017): Volume 4 Issue 4 April 2017

Section

Articles

How to Cite

PARTIAL REPLACEMENT OF SAND BY STEEL SLAG IN TILES. (2017). International Journal of Advance Engineering and Research Development (IJAERD), 4(4), 1264-1268. https://www.ijaerd.org/index.php/IJAERD/article/view/2861

Similar Articles

1-10 of 728

You may also start an advanced similarity search for this article.