EVALUATION OF SHEAR STRENGTH OF HYDRAFORM DRY STACK MASONRY

Authors

  • Johar Hafeez Civil Engineering Department, Iqra National University, Peshawar, Pakistan
  • Syed Muhammad Ali Civil Engineering Department, University of Engineering &Technology, Peshawar, Pakistan
  • Khan Shahzada -

Keywords:

Hydraform, Shear strength, masonry triplet

Abstract

Shear failure of the structure is the major causes of many structures. In case of dry stack masonry, the shear
resistance is totally based on the friction between the surfaces. Rough surface will have more resistance to shear as
compared to smooth surface. In this paper shear strength of Hydraform dry stack masonry were investigated with the
varying vertical load. Triplet test were conducted for finding coefficient of friction. It was find from the experimental
results that coefficient of friction of Hydraform block masonry is 0.55

Downloads

Published

2018-03-25

How to Cite

Johar Hafeez, Syed Muhammad Ali, & Khan Shahzada. (2018). EVALUATION OF SHEAR STRENGTH OF HYDRAFORM DRY STACK MASONRY. International Journal of Advance Engineering and Research Development (IJAERD), 5(3), 1073–1075. Retrieved from https://www.ijaerd.org/index.php/IJAERD/article/view/2823

Issue

Vol. 5 No. 3 (2018): Volume 5 Issue 3 March 2018

Section

Articles

Most read articles by the same author(s)

1 2 > >>