Obtaining the Output Parameters for Different Powder Concentrationin PMEDM
| Author(s) | : | BSV Ramarao, Dr. P Shailesh, Dr. M Sreenivasarao |
| Institution | : | Assoc. Professor, DeptOfMech, ASTI, Hyderabad |
| Published In | : | Vol. 3, Issue 6 — June 2016 |
| Page No. | : | 215-225 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
Now-a-days many industries are working to find out the best metal alloys to obtain the optimized outputs fortheir products all the time. Out of all the available, Titanium alloy is one which is extensively used in many industrialapplications because of its positive characteristics like corrosive resistance, fracture resistance and high strength toweight ratio and so on. It is quite necessary to know the better concentration of powder concentration which is to bemixed in the dielectric fluid when working on the aluminium alloy before going to fix the values in the levels of theparameter. In this paper more than 30 trails were performed to determine MRR, SR and TWR.
BSV Ramarao, Dr. P Shailesh, Dr. M Sreenivasarao, “Obtaining the Output Parameters for Different Powder Concentrationin PMEDM”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 3, Issue 6, pp. 215-225, June 2016.
