A STUDY ON TYPES OF WEARS IN MILLING TOOLS
| Author(s) | : | Sonal C Yogi, Pragnesh Brahmbhatt |
| Institution | : | Phd Scholar, Department of Mechanical Engineering, Rai University, Ahmadabad (Guj.), India |
| Published In | : | Vol. 2, Issue 1 — January 2015 |
| Page No. | : | 230-234 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
The main aim of this work is to study the different types of wears caused during the milling processes and thecauses. Tool wear can be described as the gradual failure of tools while the cutting operation is being performed regularly.This paper shows that there are different types of tool wears that occur in different conditions. The main occurrence of wearwas seen due to mechanical friction, adhesion, high cutting temperature. Also the chemical wear was promoted due tocutting forces. By the study of wears caused wear patterns like rake face wear, flank wear, fracture, breakage and chippingwere also observed. The research results are of great help in selecting the materials for the tools and the wear control in toolwhere high speed machining is required.
Sonal C Yogi, Pragnesh Brahmbhatt, “A STUDY ON TYPES OF WEARS IN MILLING TOOLS”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 2, Issue 1, pp. 230-234, January 2015.
